Florida Gas Transmission 10-Inch St. Petersburg Lateral Hydrostatic Test
About The Test

A hydrostatic pressure test consists of filling a pipeline with water and then pressurizing the water. Before the test begins, all natural gas is removed from the system. System valves will be shut off and customers will use up the natural gas in the system, starting approximately one week before the test. After safely venting off any residual remaining natural gas, the pipeline will be filled with water to begin the hydrostatic pressure test. During the test, natural gas service will be maintained on a separate Florida Gas Transmission pipeline, so customers can maintain their normal use, uninterrupted.

Under normal conditions, the natural gas pipeline operates at 712 PSI (pounds per square inch) of pressure. Under hydrostatic testing conditions the pipeline will be stressed, with water, to almost double that pressure (1,500 PSI) for approximately 30 minutes. The second stage of the hydrostatic test will maintain the pressure on the pipeline at 1,350 PSI for approximately 8 hours.

If any integrity issues in the pipeline are found during the test, they will be corrected as soon as possible, immediately following the removal of the water from the system. After any required repairs are completed, the entire hydrotest will be performed again. Upon successful completion of the test, the water will be removed from the system, and normal natural gas service will be resumed.